You can copy the label of an existing BD/DVD/CD and print it on a printable disc.
Important
-
Make sure that the printer is turned on.
-
Press the MENU button.
The menu screen is displayed.
-
Select Advanced print, then press the OK button.
-
Select Copy label to disc label, then press the OK button.
The print area setting screen is displayed.
-
Specify the print area, then press the OK button.
Use the button to select Outer circle or Inner circle and use the button to change the print area.
Note
-
Measure the outer and inner diameters of the printing surface of the printable disc and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
-
For information on printable discs, contact their manufacturers.
-
Use the button to select a printable disc type, then press the OK button.
Note
-
Follow the on-screen instructions to load the copy source BD/DVD/CD on the Platen Glass, then press the OK button.
The print setting confirmation screen is displayed.
Important
-
Press the Color button for color copying, or the Black button for black & white copying.
-
Follow the on-screen instructions to set the printable disc.
Note
-
You can see the procedure to set the printable disc by pressing the left Function button. The next screen is displayed by pressing the OK button. Additionally, pressing the Stop button returns to the print confirmation screen.
-
For details on how to set the printable disc:
Placing a Printable Disc
-
Press the OK button.
The machine starts copying.
Note
-
Press the Stop button to cancel copying.
-
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
-
To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten discs when printing more than ten discs continuously. To stop the printing operation, detach the disc tray from the machine, then close the inner cover (the cover of the disc tray). After approximately three minutes have elapsed, open the inner cover, attach the disc tray to the machine, then resume printing.
-
If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings under Device settings.
Print settings
MX922 Page