5200 error (P 0 8) occurs - Alarm Lamp and Power lamp Alternately flash 8 times - MG2120

Article ID: ART143618

Date published: 05/13/2015

Date last updated: 07/22/2019

Description

Support / Error Code

Solution

Printer error has occurred

There are a couple of reasons for a 5200 (P 0 8 on LED display) error to occur. Starting from the top, proceed to the next list item to clear the message.

The remaining ink level is low.
Check the ink level status. If the ink cartridge is empty, replace the ink cartridge with a new one.
Instructions to replace the ink cartridge.
The ink carridge is defective. Replace the ink cartridge with a new one.
Instructions to replace the ink cartridge.
If replacing the ink cartridge does not clear the error, power the printer off and on.

Press the ON button to turn the machine off.
Confirm that the Paper lamp is off.
Unplug the power cord.
Plug the power cord back in and then press the ON button.

If the error is not resolved, the printer will require servicing.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________

Rate this Article

Was this article helpful? Yes, This document is helpful No, This document needs a clearer explanation

Please provide your comments

Ask a Question

Models related to this article

5200 error (P 0 8) occurs - Alarm Lamp and Power lamp Alternately flash 8 times - MG2120

Description

Solution

Printer error has occurred

There are a couple of reasons for a 5200 (P 0 8 on LED display) error to occur. Starting from the top, proceed to the next list item to clear the message.