Ask a Question

Image edges are blurred or white banding occurs (iPF6400) (iPF6450)

Article ID: ART143704 | Date published: 05/13/2015 | Date last updated: 08/17/2015
 

Description

Image edges are blurred or white banding occurs (iPF6400) (iPF6450)

Solution

Image edges are blurred or white banding occurs (iPF6400) (iPF6450)
ID : 8201694100 _ EN _ 1
Solution

CauseCorrective Action
The Platen suction is too strong.In the Control Panel menu, reduce the level of VacuumStrngth.
(See " Adjusting the Vacuum Strength (VacuumStrngth) (iPF6400) (iPF6450) .")
Close the blue Switch on the platen so that it matches the paper size.
(See " Setting the Blue Switch on the Platen (iPF6400) (iPF6450) .")
Incorrect Printhead alignment value.When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal Printhead height before aligning the printhead.
(See " Enhancing Printing Quality (iPF6400) (iPF6450) .")
In the Control Panel menu, set Head Height to a lower height.
(See " Troubleshooting Paper Abrasion and Blurry Images(Head Height) (iPF6400) (iPF6450) .")
The type of paper specified in the printer driver does not match the type loaded in the printer.Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.


SIMS Doc Id

8201694100

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments