Line thickness is not uniform (iPF6400) (iPF6450)

Article ID: ART143723 | Date published: 05/13/2015 | Date last updated: 08/17/2015
 

Description

Line thickness is not uniform (iPF6400) (iPF6450)

Solution

CauseCorrective Action
In the Special Settings dialog box of the Windows printer driver, Fast Graphic Process is selected.Access the printer driver Properties dialog box from Print in the File menu of the source application, and follow these steps to print.
1. Clear the option Open Preview When Print Job Starts on the Main sheet.
2. Clear the option Page Layout on the Layout sheet.
3. Click the Special Settings button on the Layout sheet to display the Special Settings dialog box, and then clear the option Fast Graphic Process.
The blue Switch on the platen is set incorrectly.Move the Switch numbered corresponding to the size of paper for printing opposite to the position.
(See " Setting the Blue Switch on the Platen (iPF6400) (iPF6450) .")
The type of paper specified in the printer driver does not match the type loaded in the printer.Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Incorrect Printhead alignment value.When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal Printhead height before aligning the printhead.
(See " Enhancing Printing Quality (iPF6400) (iPF6450) .")
In the Control Panel menu, use a lower Head Height setting.
(See " Troubleshooting Paper Abrasion and Blurry Images(Head Height) (iPF6400) (iPF6450) .")
Depending on the type of paper, the thickness of printed lines may be noticeably inconsistent.Specify Proof in Print Priority in the printer driver.


SIMS Doc Id

8201694600

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments