Sending still images and movies between two Canon-brand cameras (Wi-Fi function)
Article ID: ART143761 | | | Date published: 05/13/2015 | | | Date last updated: 08/17/2015 |
Description
Sending still images and movies between two Canon-brand cameras (Wi-Fi function)
Solution
Sending still images and movies between two Canon-brand cameras (Wi-Fi function) ID
:
8201760000
_
EN
_
8
|
|
Solution |
Connect two cameras via Wi-Fi and send images between them as follows.
Connecting the cameras wirelessly Perform the following operations on of the cameras to be connected.
1. Press the <Playback> () button on the camera.
2. Press the <Wi-Fi> () button.
3. Press the <><><><> buttons to choose (), and then press the <FUNC./SET> () button.
4. Press the <><> buttons to choose [Add a Device], and then press the <FUNC./SET> () button.
5. The following screen appears.
Camera connection information will be added when [Start connection on target camera] is displayed on camera screens.
When the target camera has been added successfully, the image transfer screen will be displayed. For sending images, proceed to step 7.
6. Once cameras are connected, a screen like the one below will appear.
Sending one image at a time to a camera 7. Press the <><> buttons to choose [Send this image], and then press the <FUNC./SET> () button.
8. The following screen appears.
After the image has been sent to the target camera and the [Transfer completed] message appears, return to step 7.
Sending multiple images to a camera 9. Press the <><> buttons to choose [Select and send], and then press the <FUNC./SET> () button.
10. The following screen appears.
Press the <><><><> buttons to choose an image to send, and then press the <FUNC./SET> () button. () is displayed.
To cancel selection, press the <FUNC./SET> () button again. () is no longer displayed.
If you move the zoom lever toward () twice, the camera will switch to single image display. You can press the <><> buttons to choose images.
After you finish choosing images, press the <MENU> button.
11. The following screen appears.
Press the <><> buttons to choose [Send], and then press the <FUNC./SET> () button.
After the [Transfer completed] message appears, return to step 7.
|
SIMS Doc Id
8201760000