Installing the Software Applications
Article ID: ART143881 | | | Date published: 05/13/2015 | | | Date last updated: 11/16/2015 |
Description
Installing the Software Applications
Solution
Installing the Software Applications ID
:
8201495400
_
EN
_
14
|
|
Solution |
This section describes how to install the software applications on your computer.
1. Quit any software that is running.
2. Place the [DIGITAL CAMERA Solution Disk] CD-ROM supplied with your camera into the computer.
![]()
3. Click [Run SETUP.EXE] when the following window appears.
![]()
If the window above does not appear, click [Start] (
![]() ![]()
4. Select the area in which you live.
![]()
5. Select the country where you live, and then click [Next].
![]()
6. Select Your language.
![]()
7. Select
![]() ![]() [Easy Installation]: All the software applications are automatically installed.
[Custom Installation]: You can select the software applications that you want to install.
![]()
8. The following screen will appear. Click [OK].
![]()
9. The following screen will appear. Click [Install].
![]()
10. The following screen will appear. Click [Yes] after reading the content carefully.
![]()
11. The following screen will appear. Click [Yes] after reading the content carefully.
![]()
12. When a message is displayed prompting you to connect the camera to the computer, complete the connection, and click [Next].
12-1. Connect the camera to the computer with the supplied interface cable.
* In this illustration, PowerShot S2300 is used as an example to explain the operation. The positions of buttons and shape of the model may be different depending on the model you are using.
![]()
12-2. Turn the camera on.
12-3. Click [Next].
![]()
13. If the following window appears, click [Yes].
![]()
14. The following screen appears, and installation starts.
![]()
15. The following screen will appear. Click [Next].
![]()
16. The following screen will appear. If you want to register later, select
![]() ![]() ![]()
17. Click [OK] when the following screen appears.
![]()
18. The following screen will appear. Click [Finish], remove the Solution Disk from the CD-ROM drive to conclude the installation.
![]()
If there is need to restart the computer, the [Restart] screen will display. Click [Restart] to restart the computer and complete the installation.
|
SIMS Doc Id
8201495400