Ask a Question

A Support Code Is Displayed - MG7120

Article ID: ART143908 | Date published: 05/13/2015 | Date last updated: 04/26/2019
 

Description

A Support Code Is Displayed - MG7120

Solution

A Support Code Is Displayed
ID: 8201860600_ EN_ 4
Issue

 

The support code appears on the touch screen and the computer screen when an error occurs.
"Support Code" means the error number and appears with an error message.
When an error occurs, check the support code displayed on the touch screen or the computer screen and take the appropriate action.

 
Cause

Support Code=1600
Summary

 

<Message>
The ink may have run out.
Replacing the ink tank is recommended.
<Cause>
If the lamp on the ink tank is flashing, ink may have run out.
<Action>
Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, tap OK on the machine with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition.
REFERENCE
If multiple ink lamp are flashing red, check the status of each ink tank.

 
See Also  
Cause

Support Code=1401, 1403, 1405
Summary

 

<Message>
- Print head is not installed.
Install the print head.
- The type of print head is incorrect.
Install the correct print head.
<Cause>
The print head may be damaged.
<Action>
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 
See Also  
Cause

Support Code=1680
Summary

 

<Message>
Some ink tanks are not installed in place.
<Cause>
Some ink tanks are not installed in the correct position. (The lamp on the ink tank flashes.)
<Action>
Confirm that the ink tanks are installed in the appropriate positions.

 
See Also Replacing an Ink Tank
Cause

Support Code=1681
Summary

 

<Message>
More than one ink tank of the following color is installed.
<Cause>
More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.)
<Action>
Confirm that the ink tanks are installed in the appropriate positions.

 
See Also Replacing an Ink Tank
Cause

Support Code=1683
Summary

 

<Message>
The remaining level of the ink cannot be correctly detected.
Replace the ink tank.
<Cause>
The remaining ink level cannot be correctly detected. (The lamp on the ink tank flashes.)
<Action>
Replace the ink tank and close the operation panel.
Printing with an ink tank that was once empty may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Touch the machine's Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized.
Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.
REFERENCE
If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the touch screen when checking the current ink level.

 
See Also  
Cause

Support Code=1660
Summary

 

<Message>
The following ink tank cannot be recognized.
<Cause>
The ink tank is not installed.
<Action>
Install the ink tank.

 
See Also Replacing an Ink Tank
Cause

Support Code=1684
Summary

 

<Message>
The following ink tank cannot be recognized.
<Cause>
The ink tank cannot be recognized.
<Action>
Printing cannot be executed because the ink tank may not be installed properly or may not be compatible with this machine.
Install the appropriate ink tank.
If you want to cancel printing, touch the machine's Stop button.

 
See Also Replacing an Ink Tank
Cause

Support Code=1410, 1411, 1412, 1413, 1414, 1415
Summary

 

<Message>
The following ink tank cannot be recognized.
<Cause>
The ink tank cannot be recognized.
<Action>
Open the operation panel and replace the ink tank which lamp is off.

 
See Also Replacing an Ink Tank
Cause

Support Code=1688
Summary

 

<Message>
The ink has run out.
Replace the ink tank.
<Cause>
The ink has run out. (The lamp on the ink tank flashes.)
<Action>
Replace the ink tank and close the operation panel.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Touch the machine's Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized.
Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
REFERENCE
If the function for detecting the remaining ink level is disabled, the ink tank in grey is displayed in the remaining ink volume screen on the touch screen.

 
See Also  
Cause

Support Code=1850
Summary

 

<Message>
Open the inner cover, set the disc tray and tap [OK].
<Cause>
The inner cover (the cover of the disc tray) is closed.
<Action>
Open the inner cover, attach the disc tray properly, then tap OK on the touch screen to dismiss the error.

 
See Also  
Cause

Support Code=1855
Summary

 

<Message>
Open the inner cover, set the disc tray and tap [OK].
<Cause>
The inner cover (the cover of the disc tray) has been closed.
<Action>
Open the inner cover, then tap OK on the touch screen to dismiss the error.
Do not open or close the inner cover while printing is in progress. Doing so may damage the machine.

 
See Also  
Cause

Support Code=1700, 1710
Summary

 

<Message>
The ink absorber is almost full.
Tap [OK] to continue printing.
Contact the service center for replacement.
<Cause>
The ink absorber is almost full.
<Action>
Tap OK on the touch screen to continue printing. Service will be required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 
See Also  
Cause

Support Code=5B00, 5B10
Summary

 

<Message>
Ink absorber full.
Contact the service center for replacement.
<Cause>
Printer error has occurred.
<Action>
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 
See Also  
Cause

Support Code=2500
Summary

 

<Message>
Auto head alignment failed.
Tap [OK] and redo the operation.
<See manual>
<Cause>
The cause of following may have occurred the failure of Automatic Print Head Alignment.
  • Print head nozzles are clogged.
  • The paper of size other than A4 or Letter is loaded in the cassette (lower).
  • The paper output slot is exposed to strong light.
<Action>
Tap OK on the touch screen to dismiss the error, then take the actions described below.
  • Print the nozzle check pattern to check the status of the print head.
  • Load a sheet of A4/Letter-sized Canon Matte Photo Paper MP-101 with the printing side (whiter side) facing DOWN and perform Automatic Print Head Alignment again.
  • Adjust your operating environment and/or the position of the machine so that the paper output slot is not exposed directly to strong light.
After carrying out the above measures, if the problem continues after aligning the Print Head again, tap OK on the touch screen to dismiss the error, and then perform Manual Print Head Alignment.

 
See Also  
Cause

Support Code=B200
Summary

 

<Message>
An error has occurred. The printer needs repair.
Follow the steps below.
1. Turn the device off and unplug the power cord from the power supply.
2. See the manual and contact the service center.
<Cause>
An error requiring you to contact the service center has occurred.
<Action>
Turn off the machine, and unplug the power cord of the machine from the power supply.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 
See Also  
Cause

Support Code=5100
Summary

 

<Message>
Protective material is left on the holder. Remove it and turn off power then back on.
<Cause>
Printer error has occurred.
<Action>
Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the print head holder from moving, and turn on the machine again.
IMPORTANT
  • Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it.
  • If the problem is not resolved, service is required
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 
See Also  
Cause

Support Code=6001, 6002
Summary

 

<Message>
Printer error has occurred.
Follow the steps below.
1. Turn the device off.
2. Open the paper output tray, then turn the device on again.
If problem persists, see the manual and contact the service center.
<Cause>
Printer error has occurred.
<Action>
If the paper output tray is closed, open it.
Turn off the machine, and unplug the power cord of the machine from the power supply.
Plug the machine back in and turn the machine back on.
If the problem is not resolved, service is required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account
IMPORTANT
Do not close the paper output tray while the machine is in operation; otherwise, an error will occur.

 
See Also  
Cause

Support Code=5011, 5012, 5200, 5400, 5C00, 5C20, 6000, 6500, 6502, 6800, 6801, 6900, 6901, 6902, 6910, 6911, 6920, 6921, 6930, 6931, 6932, 6933, 6934, 6935, 6936, 6937, 6938, 6940, 6941, 6942, 6943, 6944, 6945, 6946, 6B10, 6B20, C000
Summary

 

<Message>
Printer error has occurred.
Follow the steps below.
1. Cancel printing, then turn the device off.
2. Turn the device on again.
If problem persists, see the manual and contact the service center.
<Cause>
Printer error has occurred.
<Action>
Turn off the machine, and unplug the power cord of the machine from the power supply.
Plug the machine back in and turn the machine back on.

 
See Also  
Cause

 
Summary

 

If Support Code=6910 is displayed, follow the procedures below.
1. Temporarily turn off the power of all other devices on the network.
2. Set the [ IPv6 settings ] of the machine to [ Inactive ].
3. Place the machine in a different location.

 
See Also  
Cause

 
Summary

 

If the problem is not resolved, service is required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 
See Also  
Cause

 
Summary

 

REFERENCE
  • How to Disable the IPv6 Settings of the Machine
1. Select [ Setup ] on the operation panel.
2. Select [ Device settings ].
3. Select [ LAN settings ].
4. Select [ Other settings ].
5. Select [ TCP/IP settings ].
6. Select [ IPv6 ].
7. When a message displays, select [ Yes ].
8. Select [ Enable/disable IPv6 ].
9. In the screen displayed, select [ Inactive ].

 
See Also  

MG7120 Page

SIMS Doc Id

8201860600

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments