Printing out the LAN details - MX450 Series / MX470 Series / MX532

Article ID: ART143924 | Date published: 05/13/2015 | Date last updated: 05/06/2019
 

Description

This article provides instructions for printing a network configuration page.  An example of this page is attached to this article.

 

Solution

You can print out the network settings of the machine such as its IP address and SSID.

Note: The steps listed below are specific to the MX452 / MX459 / MX472 / MX479 and MX532 printers.  
For instructions for other models, click here

Important
  • This print out contains valuable information about your computer. Handle it with care.
 
  1. Make sure that the machine is turned on.
     

  2. Load a sheet of A4 or Letter-sized plain paper.
     

  3. Press the Setup  button.

    The Setup menu screen is displayed.
     

  4. Use the LEFTRIGHT button to select Device settings, then press the OK button.
     

  5. Use the LEFTRIGHT button to select LAN settings, then press the OK button.
     

  6. Use the LEFTRIGHT button to select Print LAN details, then press the OK button.

    The machine starts printing the network setting information.

    The following information on the machine's network setting is printed out.

    Item

    Explanations of the item

    Setting

    Wireless LAN

    Wireless LAN

    Enable/Disable

    Connection

    Status of the Wireless LAN

    Active/Inactive

    MAC Address

    MAC Address

    XX:XX:XX:XX:XX:XX

    SSID

    SSID

    SSID of the wireless LAN

    Communication Mode

    Communication Mode

    Infrastructure

    Channel

    Channel

    XX (1 to 13)

    Encryption

    Method of the Encryption

    none/WEP/TKIP/AES

    WEP Key Length

    WEP Key Length

    Inactive/128/64

    Authentication

    Method of the Authentication

    none/auto/open/shared/WPA-PSK/WPA2-PSK

    Signal Strength

    Signal Strength

    0 to 100 [%]

    TCP/IP Version

    TCP/IP Version

    IPv4 & IPv6/IPv4

    IPv4 IP Address

    Selected IP Address (IPv4)

    XXX.XXX.XXX.XXX

    IPv4 Default Gateway

    Default Gateway (IPv4)

    XXX.XXX.XXX.XXX

    Subnet Mask

    Subnet Mask

    XXX.XXX.XXX.XXX

    IPv6 IP Address *1

    Selected IP Address (IPv6)

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    IPv6 Default Gateway *1

    Default Gateway (IPv6)

    XXXX:XXXX:XXXX:XXXX
    XXXX:XXXX:XXXX:XXXX

    Subnet Prefix Length*1

    Subnet Prefix Length

    XXX

    IPsec*2

    IPsec setting

    Active

    Security Protocol*2

    Method of the Security Protocol

    ESP/ESP & AH/AH

    Wireless LAN DRX

    Discontinuous reception (wireless LAN)

    Enable/Disable

    Other Settings

    Other settings

    -

    Printer Name

    Printer name

    Printer name (Up to 15 characters)

    WSD

    WSD setting

    Enable/Disable

    WSD Timeout

    Timeout

    1/5/10/15/20 [min]

    LPR Protocol

    LPR protocol setting

    Enable/Disable

    Bonjour

    Bonjour setting

    Enable/Disable

    Bonjour Service Name

    Bonjour service name

    Bonjour service name (Up to 52 characters)

    DNS Server

    Getting DNS Server automatically

    Auto/Manual

    Primary Server

    Primary server address

    XXX.XXX.XXX.XXX

    Secondary Server

    Secondary server address

    XXX.XXX.XXX.XXX

    Proxy Server

    Proxy Server setting

    Enable/Disable

    Proxy Port

    Specifying Proxy Port

    1 to 65535

    Proxy Address

    Proxy Address

    XXXXXXXXXXXXXXXXXXXX

    IP Address Filtering

    IP Address Filtering

    Enable/Disable

    ("XX" represents alphanumeric characters.)

    *1 Only when IPv6 is activated, the status of the network is printed.

    *2 Only IPv6 and the IPsec setting are activated, the status of the network is printed.

Page top

Attachment

MX45X_47X_532_NW_Settings.pdf
84K • < 1 minute @ 56k, < 1 minute @ broadband



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments