Network Configuration Page Admin Password

Article ID: ART147201 | Date published: 05/19/2015 | Date last updated: 02/20/2020


This article shows the Admins Password page for your printer. You'll need your printer's IP address in order to access this.


[Use admin password]

Set a password for the printer to allow specific people to perform setup and configurations operation.
To use a password, set this item to ON, and enter a password.

 The password can have up to 32 single-byte alphanumeric characters. The input is case-sensitive. Make sure that you do not forget the password that was set.


Enter the admin password to be set.

[Password Confirmation]
Enter the same password again to confirm it.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments