MX432 Software Installation - Macintosh

Article ID: ART148903 | Date published: 05/20/2015 | Date last updated: 11/05/2015


MX432 Software Installation - Macintosh


This information also applies to the MX439


If your printer is already connected to the wireless network, it is only necessary to install the software to be able to use the printer on the wireless network. Make sure the printer is powered on, insert the Setup CD-ROM and follow the on-screen instructions.*


*In addition to the following steps, depending on OS version, you may also be required to provide the administrative password and / or allow access to keychain information.


  1. Click Next after reading the information.

  2. The Software Installation List appears. Select software you wish to install and click Next.

    MP Drivers and Canon IJ Network Tool must be selected to use the printer.

  3. Click Yes on the License Agreement.



  4. After the software has installed, the Detected Printers List appears. Select the Printer and click Next.



  5. Click OK on Setup Completion.



  6. Click Add Printer on the Add Printer screen.



  7. Select the printer with Canon IJ Network listed in the Kind column. Click Add.


  8. The printer is now set up. Continue following remaining on-screen informational steps.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments