Attach the Battery to the Printer Correctly - iP100 / iP110

Article ID: ART150777 | Date published: 05/22/2015 | Date last updated: 05/09/2019


This article shows how to attach the battery to the PIXMA iP100 / iP110.



Attach the Battery to the Printer Correctly

When using the printer in locations where there is no power outlet (outdoors, etc.), attach the optional battery (i.e. battery pack installed in the battery attachment) to the printer. Before using the battery pack and battery attachment, read "Safety Precautions" thoroughly.

1. Turn off the printer and disconnect the AC adapter and USB cable from the printer.
2. Load the battery pack in the battery attachment.
Load the battery pack in the battery attachment with the printer connector facing upward, and then push down on the battery pack until it clicks.
(A) Printer connector
Important: If the printer connector of the battery pack is dirty, the printer may not operate. Keep the printer connector clean. If it becomes dirty, wipe it clean with a soft, dry cloth.
3. Remove the battery connector covers on the printer.
Important: You can store the battery connector cover in the battery attachment.
(A) Battery connector cover
4. Attach the battery to the printer.
(1) Align the printer connector of the battery pack with the battery connector of the printer, and then insert the left and right protrusions on the battery attachment as illustrated below.
(A) Battery connector
(B) Printer connector
(C) Protrusion
(2) Secure the battery to the printer by tightening two locking screws.
Tighten the screws securely using a coin or a screwdriver.
(D) Locking screw
Note: When the battery pack will not be used for a long period of time (6 months or longer), remove the battery from the printer.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments