Ask a Question

Aligning the print head without a computer - iP100

Article ID: ART150809 | Date published: 05/22/2015 | Date last updated: 12/01/2015
 

Description

Aligning the print head without a computer - iP100

Solution

Aligning the Print Head

An automatic print head alignment can be performed without using a computer by following the steps below.

1. With the printer on, load one sheet of Letter-sized Canon Matte Photo Paper MP-101 with the printing side (whiter side) facing UP in the Rear Tray.

 

2. Hold down the < Resume/Cancel > button until the POWER lamp flashes green four times, and then release it immediately. The automatic alignment will then commence.


The print head alignment pattern is printed. Do not open the Top Cover while printing. The print head position is adjusted automatically when the print head alignment pattern finishes printing.






 

 

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments