Including the Date on Printed Images

• To select items that are displayed on the printer's [LCD monitor], press the four-way arrow button to the left, right, top, or bottom.

• Screens, menu listings, or the locations of the buttons may differ depending on the printer model being used.
• When printing from the memory card, please make sure that no cameras or PCs are connected.
• Please use memory cards that have been initialized with the camera. There are cases where images are not recognized if memory cards that were initialized with a PC are used.
• There are cases where images are not displayed or printed correctly if the images were edited on a PC.
• When printing images that were shot with mobile phones, there are cases where the images are not displayed or printed correctly depending on the image size that was set during shooting.
• This SELPHY printer supports image data conforming to the Design rule for Camera File system (Exif compliant) and DPOF (Ver.1.00) standard.
• This Printing Guide uses the [SELPHY CP770] as an example for explanatory purposes. The [SELPHY CP760] also has the same operational features.

 

1. Turn on the printer and insert the memory card.
   
   Turn on the printer by holding the power button until the green power light turns on.
   
   Insert the memory card.
   
   Insert the memory card into the appropriate slot. There are lead-in guides to match the size of the memory cards in [SD / miniSD / MMC+] slot. Please insert small memory cards (miniSD cards) into the lower slot, following the guide. Insert only one memory card.
2. The following screen appears on the printer's [LCD monitor] (Display when [Info Display] is set to [On]).
   
3. When pressing the <MENU> () button , the following screen appears, so select [Print Settings].
   
4. The following screen appears. You can set [Date] or [Borders] in this screen. Press the <BACK> () button after making settings
   
5. The following screen appears, so press the <BACK> () button to return to the image-selection screen.
   
6. The following screen appears.
   
   
   When you select [Date] and [Borders], make sure that these settings are shown with icons on the LCD monitor's right hand side.
   
   [Date]
   
   [Correct Red-Eye]
   
   [My Colors]
   
   [Page Layout]
   
   [Image Optimize]
   
   [Borders]
   
   If () is shown below an icon, the setting is [Off], and if an icon is grayed out, the setting is not available.
   
   e.g., [Date]
   () [Date] [On]
   () [Date] [Off]
   () [Date] Cannot be set.*
   
   * The date imprint cannot be used when the [Index] print layout is used.
   
   * The date imprint cannot be printed on card sized sheets using the [8-up] print layout.
    
7. Specify the number of copies for printing.
   
   
   Select the image you want to print, and then press the <COPIES> () buttons to specify the number of copies to make
   
   The screen shows the number of sheets that are required for printing.
   
   Press the <PRINT> () button, and printing will start.

note:

• The date used in the date imprint is the shooting date in the Exif data included with each image data. If the image data does not contain Exif information, the file modification date is used as the date imprint.