Imprinting the Date and Time

The date and time can be imprinted on the back or on sides of your photograph

Select the date/time combination .The date/time combination changes each time you press the DATE button Shoot the picture with the desired date/time combination selected.

Dale/time combination display

* :Only the day, hour and minute (20 14:25) are displayed on the LCD panel, but the imprinted data will show a combination 01 hours. minutes, and the date in the selected date format (Year-Month .Day, Month-Day-Year. or Day Month .Year). (Ex. " 98 5 20 14:25".)

Note that the imprinting position, character size font and color and the availability of -side vary depending on the store selected for processing and printing

• The date, time and title do not appear on the film negative but are imprinted when the prints are made, using the data magnetically recorded on the film by the camera (IX data) .

• In addition to the date and time, the data imprinted on the back of each photo includes the film cartridge

---

Selecting the Date Form

Select the date format . The date format changes each time you press the SET button . Always use the pushbutton projection on the strap buckle to push the SET button

---

Setting the Date and Time

When you replace the battery or travel abroad, use the procedure below to set or adjust the date and time settings .

• Always use the pushbutton projection on the strap buckle to push the SELECT and SET buttons

	Display the date only. Press the DATE button to display the date only. Skip to step 5 to set the time.
	Select a date setting. Press the SELECT button to select the number you want to change . The selected setting (blinking numbers) changes sequentially from year to month to day
	Set the date. Press the SET button to change the number. Hold the button down for 2 seconds or more to change the setting continuously
	Set all the date settings. Repeat steps 2 and 3 to set all the date settings. When you press the SELECT button and no settings blink, date setting is complete
	Display the date and time. Press the DATE button to display the date and time. You cannot set the date when the date and time are displayed
	Set all the time settings. Repeat steps 2 and 3 to set all the time settings. If you press the SELECT button and the colon (:) does not blink, time setting is complete.