How to change the receive mode when fax machine is set to DRPD (L80)

Article ID: ART151091 | Date published: 05/22/2015 | Date last updated: 10/16/2015


Set unit to FaxTel mode first.


Set unit to FaxTel mode first

When the L80 is set to DRPD, you must change the receive mode to FAX/TEL before being able to change to ANS MODE or MANUAL MODE.

Follow the procedure below to change the Receive Mode to FAX/TEL first.

  1. Press <Function>.
  2. Press <Data Registration>.

  3. Press <Set>.

  4. Use or to select [RX SETTINGS].

  5. Press <Set>.

  6. Use or to select [RX MODE].

  7. Press <Set>.

  8. Use or to select [FAX/TEL AUTO SW].

  9. Press <Set>.

  10. Press <Stop/Reset> to return to standby mode.

  11. Confirm that FaxTel is displayed in the LCD.

Once the unit is in Fax/Tel Mode follow the process below to set to Manual or AnsMode

  1. Press <Function>, then <Receive Mode>.
  2. Press or to select Manual or AnsMode.
  3. Press <Set>.

The LCD changes to this display:



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments