Clean the Paper Feed Roller - PIXMA PRO-1
Article ID: ART151107 | Date published: 05/22/2015 | Date last updated: 02/27/2020
 

Description

Learn how to clean the paper feed roller on a PIXMA PRO-1 printer.

Solution

If the paper feed roller is dirty or paper dust is attached to it, the paper may not feed properly. In this case, the paper feed rollers will need to be cleaned.
Note Cleaning wears out the paper feed roller, so perform this only when necessary.


Clean the paper feed roller

  1. Turn the printer ON.

  2. Open the paper output tray, and pull out the output tray extension.

  3. If the inner cover is open, close it.

  4. Open the printer driver setup window (specific steps for Windows and Mac are provided below).

    • Windows: Select the Maintenance tab (1), then Roller Cleaning (2).
      Roller Cleaning selected from maintenance tab in Printing Preferences window

    • Mac®Open the Canon IJ Printer Utility and select Cleaning (1) from the drop-down, then Roller Cleaning (2).

      Mac Print Utility screen with Cleaning selected from drop-down, then Roller Cleaning selected.|

  5. Select the radio button next to the paper feed location you want to use (Rear Tray or Manual Feed Tray), then select OK.
    Note If you chose Manual Feed Tray, skip to Step 7.

  6. Remove the paper from the rear tray and select OK. The paper feed roller will clean without paper in it. The roller rotates as it cleans. Wait for it to stop, then go to the next step.

  7. Load three sheets of A4 or Letter-sized plain paper in the rear tray, then select OK. The printer starts cleaning.

  8. Cleaning completes and the paper ejects. When the completion message appears, select OK.
    Caution Don't perform any other operations until the printer completes the task.

  9. Repeat Steps 7-8 two more times.

  10. The cleaning completes after the third cycle. When the completion message appears, select OK.



If the problem isn't resolved after cleaning the paper feed roller in the rear tray

  1. Turn off the power and disconnect the power plug.

  2. Wipe the paper feed roller (the large paper feed roller in the center and the three rollers on each side of it) as follows:

    • Wipe (A) located in the rear tray with a moistened cotton swab or a clean white cloth.
      Caution Don't touch the paper feed roller (B) with your fingers.

    • Wipe the paper feed roller parts while turning the shaft (C) with your fingers.

  3. After you clean the paper feed roller parts, turn on the power and repeat the procedure from step 1 to clean the paper feed roller.

    Image shows large paper feed roller (A), paper feed roller (B), and shaft (C)


If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

SIMS Doc Id

8201089100