An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR RX REPORT when an error occurs.
See the table below for individual error codes.
|
Error Code
|
Description
|
Action
|
|
0001
|
The sender may notbeusing a G3 fax machine. |
Make sure the sender's machine is compatible with your machine. |
|
0070
|
Reception was manually canceled on the machine. |
Ask the sender to resend the document if necessary. |
|
0071
|
The machine's memory is full. |
Print, send, or delete any documents stored in memory. |
|
0080
|
The recipient's machine did not respond within 35 seconds. |
Resend the document. Ask the other party to check their machine. If you are making an overseas call, add a pause to the number. |
|
008D
|
The recipient's machine has run out of paper. |
Ask the recipient to make sure that paper is loaded in their machine. |
|
00A0
|
Transmission was manually canceled on the machine. |
Resend the document if necssary. |
|
00A1
|
There is a document jam. |
Clear the document jam. |
|
00FF
|
All Redialing attempts have failed. |
Check if the recipient's number is correct or the telephone cable is properly connected, and try again. |
