Cleaning the Print Head from the Printer (PRO-10)
Article ID: ART151241 | Date published: 05/22/2015 | Date last updated: 02/29/2016
 

Description

Cleaning the Print Head from the Printer (PRO-10)

Solution

Cleaning the Print Head From the Printer

Clean the print head if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.

 Note:  When cleaning the print head using the button on the printer, the nozzles of all ink colors are cleaned.
  1. Make sure that the power is turned on.
  2. Hold down the RESUME/CANCEL button until the POWER lamp flashes white once, then release it immediately.
    The printer starts cleaning the print head.
    When the POWER lamp is lit white after flashing, the cleaning will be complete.
    Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 2 to 3 minutes.
     

Print the nozzle check pattern to check the print head condition after cleaning.
Printing the Nozzle Check Pattern
 

 Note:  If the problem is not resolved after cleaning the print head twice, clean the print head deeply from the computer.

SIMS Doc Id

8201088100