Ask a Question

MT-24EX : How to fire only one flash tube at a time?

Article ID: ART151512 | Date published: 05/22/2015 | Date last updated: 02/04/2016
 

Description

How to fire only one flash tube at a time?

Solution

Firing only one flash tube
Press the <RATIO> button and select RATIO A:B
  • Each time you press the button the section will change in the following loop:
  • The flash ratio and the icon will be displayed

Press the button to move the bar all the way to the left or right to the or icon

  • Fires only flash tube A
  • Fire only flash tube B
  • With Type-A cameras other than the EOS-1V and EOS-3, the flash ratio cannot be set. Flash tubes A and B will fire at the same output. Or, you can fire only one flash tube
  • Pressing the <RATIO> button will not display the RATIO icon and flash ratio. Selecting the left or right tube will fire only one of the flash tubes. When tube icons are displayed, flash tubes will fire at the same output.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments