MT-24EX : How to set and use the Second-Curtain Sync mode.

Article ID: ART151517 | Date published: 05/22/2015 | Date last updated: 02/04/2016


How to set and use the Second-Curtain Sync mode.


Normally, the flash fires in synchronization with the first shutter curtain when the shutter is fully open. With second-curtain synchronization, the flash fires immediately before the second shutter closes at the end of the exposure
Set the shooting mode with the camera

Press the <+> or <-> buttons simultaneously to select on the LCD panel.

  • Each time you press the <+> and <-> buttons simultaneously, the synchronization mode changes in the following loop:

Focus and take the picture

  • Check that the flash icon is displayed in the viewfinder before taking the picture
  • To cancel second-curtain synchronization press the <+> and <-> buttons simultaneously to turn off the icon on the LCD panel
  • With the Rebel G, TTL autoflash is used with second-curtain synchronization
  • Second-curtain synchronization does not work with camera's (Full Auto) shooting mode and Programmed Image Control modes



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments