Registering one-touch speed dial on FAX-JX200

Article ID: ART151604

Date published: 05/22/2015

Date last updated: 12/29/2015

Description

The quickest way to dial a fax number is to use one-touch speed dialing. This allows you to dial a number by pressing a single button.

Solution

Registering One-touch Speed Dialing Numbers and Names

One-touch speed dialing allows you to dial a number by pressing a single button. Before you can use one-touch speed dialing, you must register the receiving number with your fax. You can also register the name of the party; the name appears on the printout of the one-touch speed dialing list.

1. Press <Menu>.

2. Use to select [TEL REGISTRATION], then press <Start/Copy>. The LCD displays [1-TOUCH SPD DIAL].

3. Press <Start/Copy>. The LCD displays [01= ].

4. Use to select the number of the one-touch speed dialing button (01-09) under which you want to register the number, then press <Start/Copy> twice. If a number is already registered under this one-touch speed dialing button, the number is displayed on the LCD.

5. Enter the party's number (up to 60 digits) using the numeric buttons (see below), then press <Start/Copy> twice.

6. Enter the party's name (up to 16 letters) using the numeric buttons(see below), then press <Start/Copy> to register the name.

Note : To delete the name and number registered under the one-touch speed dialing button, press <Clear> and <Start/Copy> after you perform steps 1 to 4.

7. To assign additional one-touch speed dialing numbers, repeat from step 4. To finish, press <Stop>.

Guidelines for Entering Numbers, Letters, and Symbols

When you come to a step that requires you to enter a name or number, see the table below to determine which numeric button to press for the letter you want.

Top of Page

Entering Numbers, Letters, and Symbols :

1. Press to switch between the letter and number mode.

2. Use the numeric buttons to enter characters.

To enter a character that is under the same button as the previous entry:

Press , then press the same numeric button.

To enter a space:

Press or press <Space>.

To delete a character:

In number mode, press . In uppercase or lowercase mode, use or to move the cursor under the incorrect letter. Then press <Space>.

To delete an entire entry:

Press <Clear>.

3. Continue entering other letters or numbers using the numeric buttons.

4. When you have finished entering characters, press <Start/Copy> to register the entry.