Fan documents prior to inserting them into the B45 document feeder
Article ID: ART152267 | Date published: 05/22/2015 | Date last updated: 12/29/2015


Fan multi-page documents prior to inserting them into the Automatic Document Feeder (ADF).


Fan Documents

Fan the documents prior to loading them into Automatic Document Feeder (ADF).

  1. Remove all documents from the ADF.

  2. Fan out the sheets of paper well so that they do not stick together.

  3. Stack the documents on a flat surface to align the edges of the paper.

  4. Insert the top of the document, face up, into the ADF until a beep is heard.

  5. Adjust the document guide to the width of the document.

For a multi-page document, the pages are fed one by one from the top of the stack.
  1. Wait until all pages of your document have been scanned before starting a new job.
  2. Make sure you follow the procedure above to load documents into the document tray. If the document is not loaded into the document tray correctly, it may not be fed into the fax properly; resulting in a jam, or in pages not being sent.
  3. If you want to send a document with more than 15 (5 legal-size) pages, divide the document into sections and send each section in a separate transmission.