Calibrating the scanner (LiDE 700F)

Article ID: ART152430 | Date published: 05/22/2015 | Date last updated: 10/02/2015


Calibrating the scanner (LiDE 700F)


Calibrating the CanoScan LiDE 700F

  1. From within ScanGear, click the Preferences button at the bottom. Note: While the screenshot below shows "Basic Mode", the Preferences button can also be accessed from "Advanced Mode" and "Auto Scan Mode" as well.

  2. On the "Scanner" tab, the Calibration options can be found. Click Execute to begin the calibration process.

  3. The calibration process may last anywhere from 1 to 2 minutes.

    When the above window disappears from the screen, then the calibration is complete.

    Repeat the calibration up to 3 times if the desired results are not achieved.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments