Load paper properly into the FAX-JX210P

Article ID: ART152489 | Date published: 05/22/2015 | Date last updated: 12/28/2015


Fan paper prior to inserting into the rear tray.


Loading Documents and Paper

Your fax supports A4-, letter-, and legal-size paper in portrait orientation.

  1. Open the Document Cover (1) and extend the Paper Support (2) to support the paper.

  2. Squeeze, then slide the Paper Guide to the left.

  3. Insert the stack face up into the Rear Tray (1), and align the right edge of the stack with the right side of the Rear Tray. Then slide the Paper Guide (2) snugly against the left edge of the stack. Be careful not to press the Paper Guide strongly against the stack, or the paper will not be fed properly.

  4. Adjust the Document Guide to the width of the document, and gently insert the top of the document face up into the Document Tray until you hear a beep.

Note : For a multipage document, the pages are fed one by one from the top of the stack. Wait until all pages of your document have been scanned before starting a new job. Make sure you follow the procedure to load documents into the Document Tray. If the document is not loaded into the Document Tray correctly, it may not be fed into the fax properly; resulting in a jam, or in pages not being sent. If you want to send a document with more than 20 (10 legal-size) pages, divide the document into sections and send each section in a separate transmission. For multipage documents, tap the stack on a flat surface to even the edges before loading.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments