Change Remote RX ID on FAX-JX210P

Article ID: ART152552 | Date published: 05/22/2015 | Date last updated: 12/29/2015


Change Remote RX ID number from the default setting (25).


Remote RX

If the fax interrupts telephone conversations, change the Remote RX ID number. The default Remote RX ID number is 25. See the folloing steps to change the Remote RX ID number.

  1. Press <Menu>. [DATA REGISTRATION] will appear on the display.
  2. Press <Start/Copy>.
  3. Use to select [RX SETTINGS].
  4. Press <Start/Copy>.
  5. Use to select [REMOTE RX]. Press <Start/Copy>.
  6. Use to select [ON]. Press <Start/Copy> twice.
  7. The current Remote RX ID number will appear.
  8. Enter the preferred ID using the keypad.
    1. Alternatively, you can change the number by pressing to increase or decrease the number

  9. Press <Start/Copy>.
  10. Press <Stop/Reset> to return to standby mode (date and receive mode will appear).



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments