Ask a Question

Selecting the Power Management Mode

Article ID: ART152667 | Date published: 05/22/2015 | Date last updated: 01/28/2016
 

Description

Selecting the Power Management Mode

Solution

 

Selecting the Power Management Mode

You can turn on the projector by connecting the power cable without pressing the POWER button

Press the OK button to accept your setting and then press the MENU button.

• [Off] is the factory default.

• Before setting the direct power-on to [On], be sure to set the [Power management mode] to [Standby] or [Exit].

• After turning off the projector, wait at least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off.

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments