TCP / IP Setting
When [TCP/IP setting] is selected, the window shown below appears. Use the [
] / [
] buttons to select the IP address, then press the OK button. Next, use the [
] and [
] buttons to select the digit and the 
buttons to change the value. Press the OK button, then set the subnet mask and gateway address in the same way. Finally, select [Enter].
• The factory defaults are shown below.
IP address 192.168.254.254
Subnet mask 255.255.255.0
Gateway address 0.0.0.0
• Setting cannot be made when [DHCP] is [On].
• If an invalid value is entered, the message “Invalid entry” appears. If this occurs, enter a valid value.
