TCP / IP Setting
Article ID: ART152684 | Date published: 05/22/2015 | Date last updated: 01/28/2016


TCP / IP Setting


TCP / IP Setting

When [TCP/IP setting] is selected, the window shown below appears. Use the [ ] / [ ] buttons to select the IP address, then press the OK button. Next, use the [ ] and [ ] buttons to select the digit and the buttons to change the value. Press the OK button, then set the subnet mask and gateway address in the same way. Finally, select [Enter].

• The factory defaults are shown below.

IP address       

Subnet mask   

Gateway address

• Setting cannot be made when [DHCP]  is [On].

• If an invalid value is entered, the message “Invalid entry” appears. If this occurs, enter a valid value.