Setting Up the Projector
Article ID: ART152836 | Date published: 05/22/2015 | Date last updated: 01/26/2016
 

Description

Setting Up the Projector

Solution

Placing in Front of the Screen

Place the projector in front of the screen.

• Be sure to place the projector parallel to the screen to ensure distortion-free projections.

• The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended to limit ambient lighting in order to improve the image quality

Placing on a Level Place

Be sure to keep the projector as horizontal as possible.

If you need to point the projector up (for example, when the screen is placed on a higher position), follow the instruction given in "When Pointing the Projector Up"

• Adjust the tilt of the projecting image using the rear adjustable foot.

Ceiling Mounting or Rear Projection

You can mount the projector on the ceiling (Ceiling mounted) with it turned up side down or place it behind the screen (Rear) if you use a translucent screen. For ceiling mounting or rear projection, you have to invert the projected image

When Pointing the Projector Up

When the screen is placed on a higher position, point the projector up using the adjustable foot.

You can point it up as far as 10 degrees.

The keystone distortion of the projecting image can be corrected with the auto keystone  or by using the keystone distortion adjust function

Lift the front side of the projector and push the adjusting foot lock button to extend the adjustable foot.

Raise the image to the desired height angle, then release the button to lock the foot in place.

If Keystone Distortion is Too Large

If the keystone distortion is too large to adjust, adjust the projector height by, for example, placing it on a pedestal