Changing the Scan Settings (Fax) This section describes how to change the following scan settings to send a fax.  Resolution Specify the resolution. Higher resolutions result in better image quality but require longer transmission times. <200 x 100 dpi (Normal)> | For faxes that contain text | <200 x 200 dpi (Fine)> | For faxes that contain fine text | <200 x 200 dpi (Photo)> | For faxes that contain photographs | <200 x 400 dpi (Superfine)> | For finer resolution than when specifying Fine |
 Density Specify the density. [ ] key | Decrease the density. | [ ] key | Increase the density. |
 2-Sided Original Specify the scanning settings for 2-sided documents. <Off> | Do not specify the format settings for 2-sided documents. | <Book Type> | The vertical orientations of images on sides are the same. | <Calendar Type> | The vertical orientations of images on sides are inverse. |
 Sharpness Adjust the setting to emphasize the outline of the image or decrease the contrast. [ ] key | To clearly scan halftone photos, adjust this setting to the appropriate level on the <-> scale. This can reduce the moire (uneven gradation and striped patterns). | [ ] key | To clearly scan text or lines, adjust this setting to the appropriate level on the <+> scale. It is best suited for scanning blueprints and thinly penciled documents. |
Changing the Default Fax Settings The default settings are a set of standard settings predetermined by the machine. These settings become effective when the machine is turned ON, or when [  ] (Reset) is pressed to revert to the default settings or when returned to the default screen after auto reset is performed. You can change the following default settings based on your needs: - Resolution
- Density
- 2-Sided Original
- Sharpness
1. Press [  ] (Menu). 2. Press [  ] or [  ] to highlight <Fax TX Settings>, and then press [OK]. 3. Press [  ] or [  ] to highlight <TX Function Settings>, and then press [OK]. 4. Press [  ] or [  ] to highlight <Change Defaults>, and then press [OK]. 5. Press [  ] or [  ] to highlight the desired item, and then press [OK].  Resolution/Density/2-Sided Original/Sharpness For more information, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. 6. After you have specified the setting, press [  ] or [  ] to highlight <Apply>, and then press [OK]. 7. Press [  ] (Menu) to close the Menu screen.
|