Setting a Communication Management to Print Automatically
Article ID: ART152938 | Date published: 05/22/2015 | Date last updated: 10/07/2015
 

Description

Setting a Communication Management to Print Automatically

Solution

Specify whether to print the Communication Management report automatically.
You can also print the report manually.
The report includes the following:
  • Start time
  • Name
  • No.
  • Mode
  • Page
  • Result
- OK
Transmission finished successfully.
- NG
Transmission failed.
If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine.

1. Press [ ] (Report).

2. Press [ ] or [ ] to highlight <Report Settings>, and then press [OK].

3. Press [ ] or [ ] to highlight <Communication Management Report>, and then press [OK].

4. Specify how you want to print the report.


If you do not want to print the report automatically:
(1) Press [ ] or [ ] to highlight <Auto Print (40 Transmissions)>, and then press [OK].
(2) Press [ ] or [ ] to highlight <Off>, and then press [OK].
(3) Proceed to step 5.


If you want to print the report automatically:
(1) Press [ ] or [ ] to highlight <Auto Print (40 Transmissions)>, and then press [OK].
(2) Press [ ] or [ ] to highlight <On>, and then press [OK].
(3) Proceed to step 5.


If you want to print the sending and receiving reports separately:
(1) Press [ ] or [ ] to highlight <Separate TX/RX>, and then press [OK].
(2) Press [ ] or [ ] to highlight <Off> or <On>, and then press [OK].
  • <Off>: Prints the sending and receiving reports together.
  • <On>: Prints the sending and receiving reports separately.
(3) Proceed to step 5.

5. Press [ ] (Report) to close <Report Settings> screen.


SIMS Doc Id

8201622800