Setting Receive Result Reports to Print Automatically
| Article ID: ART152940 |
| |
Date published: 05/22/2015 |
| |
Date last updated: 10/07/2015 |
Description
Setting Receive Result Reports to Print Automatically
Solution
| Setting Receive Result Reports to Print Automatically ID : 8201623000 _ EN _ 1 |
| Solution | Specify whether to print the Receive Results report automatically. The report includes the following information: - Job No.
- Address
- Name
- Start time
- Call length
- Sheets
- Result
- OK Transmission finished successfully. - NG Transmission failed. If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. 1. Press [  ] (Report). 2. Press [  ] or [  ] to highlight <Report Settings>, and then press [OK].
 3. Press [ ] or [ ] to highlight <RX Result Report>, and then press [OK].
 4. Specify how you want to print the report.
  If you want to print the report manually: (1) Press [ ] or [ ] to highlight <Off>, and then press [OK]. (2) Proceed to step 5. If you want to print the report every time you receive a document: (1) Press [ ] or [ ] to highlight <On>, and then press [OK]. (2) Proceed to step 5. If you want to print the report only when a receive error occurs: (1) Press [ ] or [ ] to highlight <Only When Error Occurs>, and then press [OK]. (2) Proceed to step 5. 5. Press [ ] (Report) to close <Report Settings> screen.
|
