The screens you see below will only appear if you use the Setup CD that came with your printer. A USB cable is required for this setup method.
 If you don't have the CD, you can get download instructions for performing a wireless setup using a downloaded driver.

PRO-100 Wi-Fi^® setup screens

When installing the printer for use on a wireless network, you'll see these screens. Follow the onscreen prompts to complete the setup.

1. Initial setup screen. Select Next to continue.

   

2. Select Network Connection to set up the printer for use over a Wi-Fi^® network.

   

3. Select Wireless Connection to set up the printer for use on a wireless network.

   

4. Make sure your printer is turned ON, then select Next to continue.

   

5. To get more information on wireless connections (see the screen below this one), select the Click here link.

   

   

6. Select Connect to the network to continue.

   

7. Select Wireless Setup Using the USB Cable.

   

8. Select any optional software you want to download (click on the check box to select, click again to remove), then select the Next button.

   

9. To continue, select Yes on the License Agreement screen.

   

   

10. The Install Wizard will start when you select Allow.

    

    You'll see the install progress screen. Wait for the process to finish.

    

11. On the Set Up New Printer screen, select Next.

    

12. Connect the USB Cable to the printer and your computer.

    

    You'll see some status screens.

    

    

13. Confirm the Access Point by selecting Yes.

    

    You'll see more status screens.

    

    

14. Disconnect the USB cable, the select Next.

    

15. Setup is complete. Choose View Setup Results or Complete.