Setting the Flash (Flash On) (PowerShot N)
| Article ID: ART153118 |
| |
Date published: 05/22/2015 |
| |
Date last updated: 01/26/2016 |
Description
Setting the Flash (Flash On) (PowerShot N)
Solution
| Setting the Flash (Flash On) (PowerShot N)
ID : 8201829000 _ EN _ 2
|
| Solution |
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
IMPORTANT
- In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
- [Creative Shot] (
 ), [Hybrid Auto] (
 ), [AUTO] (
 ), [Super Slow Motion Movie] (
 )
1. Press the power button to turn the camera on.
2. Touch [FUNC.].
3. The following screen appears.
 Drag up or down across the screen to choose [Flash], and then
 touch [On].
4. If the following icon is displayed on the monitor, the setting is complete.
|