Ask a Question

Printing the Nozzle Check Pattern MP450

Article ID: ART153378 | Date published: 06/02/2015 | Date last updated: 08/17/2015
 

Description

Instructions for printing the Nozzle Check Pattern.

Solution

Printing the Nozzle Check Pattern

The nozzle check pattern shows if each print head nozzle is operating properly.

  1. Open the paper output tray.
    (Confirm that the paper thickness lever is set to the left.)

  2. Load letter-sized plain paper in the auto sheet feeder (ASF).

  3. Press the <Menu> button.

  4. Press the left or right cursor to select [Maintenance/settings], then press <OK>.

  5. Press the left or right cursor to select [Maintenance], then press <OK>.

  6. Press the up or down cursor to select [Nozzle check], then press the <OK>.



  7. Press the up or down cursor to select [Yes], then press <OK>. (The nozzle check pattern is printed.)

  8. Confirm the nozzle check pattern.

< 1 > The normal nozzle check pattern

< 2 > The abnormal nozzle check pattern

< 3 > Some black ink lines are broken.

< 4 > White lines are present in the color ink pattern.

< 5 > black and color inks are not present.

Note:

When all patterns are printed normally, press the up / down cursor button to select "All A" and press the OK button.

When any pattern is printed abnormally, press the up / down cursor button to select "Also B" and press the OK button.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments