Ask a Question

Perform the print head cleaning procedure MP750 / MP780

Article ID: ART153438 | Date published: 06/02/2015 | Date last updated: 08/17/2015
 

Description

Perform the print head cleaning procedure

Solution

Print Head Cleaning / Head Refreshing

If the printed Nozzle Check Pattern is broken, missing, or a specific color is not printed, clean the print head.

  1. Press the <Menu> button on the printers operation panel repeatedly until [MAINTENANCE] appears in the LCD.

  2. Press the left [<] or right [>] arrow buttons to select the cleaning setting you want. Select [CLEANING] or [HEAD REFRESHING] for deep print head cleaning.

    Note: [HEAD REFRESHING] uses more ink than [CLEANING], so perform [HEAD REFRESHING] only when necessary.

  3. Press the <OK> button.

  4. Print a Nozzle Check Pattern and perform at least two Head Refreshings if the pattern is not correct.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments