1. Start your computer.

• Close any programs that are running.

2. Insert the EOS Digital Solution Disk.

• The Installer panel should now appear.

If the Installer Panel Does Not Appear Click the 'Start' button -> 'My Computer' (In versions of Windows other than Windows XP, double-click on My Computer on the desktop). Then right-click on the CD-ROM drive containing the CD, select 'Open' from the menu that appears and double-click the SETUP icon.

3. Click 'Software Installation'.

• The Preparing to Install window is displayed, and after a brief wait, the Welcome to the InstallShield Wizard for Solution Disk window is displayed.

4. Click the 'Next' button.

5. Read the details of the User License Agreement.

• If you have checked the details and agree to the terms of the Agreement, click the 'Yes' button.

6. Check the folder in which the software will be installed.

• If you wish the software to be installed in a location other than the default, enter that here.

7. Check the software to be installed.

• Check that the checkboxes for the software to be installed are selected and then click the 'Next' button.

To use File Viewer Utility, ZoomBrowser EX or RemoteCapture, you must install one of the following drivers at the same time, depending on your version of Windows: Windows XP, Me: 'Canon Camera WIA Driver' Windows 2000, 98 SE: 'Canon Camera TWAIN Driver'

8. Click the checkbox for 'EOS Kiss/REBEL/300D.

• Once you have clicked the 'EOS Kiss/REBEL/300D' checkbox so that it is checked, click the 'Next' button.

9. Check the installation details.

• Check the details and click the 'Next' button.
• Installation begins.
• The time required for the installation varies depending on your computer, but should take approximately 2 to 4 minutes.

10. Click the 'OK' button.

• Check the information in 'Canon Solution Disk setup...' and then click the 'OK' button.

11. Restart your computer.

• Ensure that 'Yes, I want to restart my computer now.' is selected and click the 'Finish' button.

12. Remove the CD.

• Once the computer has restarted, remove the CD.

13. Check the camera's communication mode.

• Set the camera's power switch to <ON> and check that [Communication] in the <> menus is set to [Normal].
• When you have finished the settings, set the camera's power switch to <OFF>.

14. Connect the camera to your computer.

15. Set the camera's power switch to <ON> to complete the installation.

• When you set the camera's power switch to <ON>, the 'Found New Hardware' message appears. When the message automatically disappears, installation is complete.

• Do not set the camera's power switch to <OFF> until the 'Found New Hardware' message automatically disappears.

• When EOS Kiss REBEL 300D screen (event screen) and the Scanner and Camera Wizard dialog box appear, click the 'Cancel' buttons and close all the open windows.

• When a window appears prompting you to restart your computer, restart the computer.

For Windows 2000, Me and 98 SE users:

• When you set the camera's power switch to <ON>, a dialog box such as Found New Hardware or Create driver information database appears, depending on your operating system and computer system. If the display automatically clears at this point, installation is complete.

• When EOS Kiss REBEL 300D screen (event screen) and the Scanner and Camera Wizard dialog box appear, click the 'Cancel' buttons and close all the open windows.

• When a window appears prompting you to restart your computer, restart the computer.