Ask a Question

Front / rear / inside / operation panel view (MP500)

Article ID: ART153848 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Front / rear / inside / operation panel view (MP500)

Solution

View of the PIXMA MP Printer

< 1 >

Document Cover

:

Open this cover when loading a document on the Platen Glass.

< 2 >

Paper Support

:

Supports paper loaded in the auto sheet feeder. Pull it out before loading paper.

< 3 >

Auto Sheet Feeder

:

Various paper can be loaded easily.
One or more sheets can be set at a time, and paper will be fed automatically one sheet at a time.

< 4 >

Paper feed slot cover

:

Open to load paper in the auto sheet feeder.

< 5 >

Cover Guide

:

Align the right side of the paper to this guide.

< 6 >

Paper Guide

:

When loading paper, pinch the knob and slide to the left edge of the paper.

< 7 >

Open button

:

Press this button to open the Paper Output Tray.

< 8 >

Paper Output Tray

:

Pull down the paper output tray and pull out the extension completely
before printing. Printed paper is ejected here.

< 9 >

Direct Print Port

:

Used when printing directly from a digital camera or a digital video camera compatible
with the machine.
Inserting the optional Bluetooth unit BU-20 allows you to do wireless printing via Bluetooth communication.

< 10 >

IrDA Port

:

Receives photo data sent from a mobile phone through infrared communication.

< 11 >

Card Slot Cover

:

Open to insert a memory card.

< 12 >

Platen Glass

:

Used to load a document to be processed.

< 13 >

Operation Panel

:

Used to change the settings or operate the machine.

< 14 >

Cassette

:

Load regulary-used paper here and insert this into the machine.
One or more sheets can be set at a time, and paper will be fed automatically one sheet at a time.

< 1 >

Print Head Lock Lever

:

Used to fix the Print Head. Do not lift this unless replacing the print head.

< 2 >

Ink Tank Lamp

:

Lights or flashes red to indicate the status of the ink tank.

< 3 >

Print Head Holder

:

Used to install a Print Head.

< 4 >

Inner Cover

:

Open this cover when replacing the ink tanks / the print head.

< 5 >

Scanning Unit (Printer Cover)

:

This is the unit used to scan documents. Open this to replace the ink tanks or remove jammed paper.

< 6 >

Card Slot

:

Set the memory card here.

< 7 >

Access Lamp

:

Lights when a memory card is inserted into the Card Slot. This lamp flashes while the
machine is reading or writing data from/to the memory card.

Note:

Ink Tank Lamp

You can check the status of each ink tank according to the way its lamp flashes.

- On: The machine is ready to print.

- Slow flashing (at about three second interval): Ink is low. Prepare a new ink tank.

- Fast flashing (at about one second interval): Ink tank is empty, or the machine is not ready due to an error.

- Off: An error has occurred and the machine is not ready to print.

< 1 >

USB Cable Port

:

This is the connector used to connect the machine to a computer using a USB cable.

< 2 >

Rear Cover

:

Open when clearing jammed paper.

< 3 >

Power Connector

:

This is the connector used to connect the provided power cord

< 1 >

ON/OFF button

:

Turns the machine ON and OFF.

< 2 >

Copy button

:

Switches the machine to Copy mode.

< 3 >

SCAN button

:

Switches the machine to Scan mode. This button is used when the machine is connected to a computer.

< 4 >

MEMORY CARD button

:

Switches the machine to Memory Card mode.

< 5 >

Alarm lamp

:

Lights / flashes orange, when an error occurs, or when paper or ink has run out.

< 6 >

LCD

:

Displays messages, menu selections, and the operation status.

< 7 >

Menu button

:

Used to display menus.

< 8 >

OK button

:

Finalizes your selection for the menu or setting item.
Also restores the machine to normal operation after a printing error was resolved, or paper jams was cleared.

< 9 >

Settings button

:

Use to configure settings including the page size, media type, and print quality.

< 10 >

Stop/Reset button

:

Cancels operations. If this button is pressed during printing, the machine aborts printing.

< 11 >

Auto Sheet Feeder lamp

:

Lit when the Auto Sheet Feeder is selected.

< 12 >

Cassette lamp

:

Lit when the Cassette is selected.

< 13 >

Feed Switch button

:

Selects the paper source. Press this toggle switch to change the paper source between the Auto Sheet Feeder and Cassette.

< 14 >

Search button

:

Looks up target photos in the memory card using the shooting date as the search key.

< 15 >

PhotoIndex Sheet button

:

Switches to Photo Index Sheet mode.

< 16 >

Back button

:

Allows you to return to the previous screen.

< 17 >

Up/down/right/left cursor button

:

Scroll through menu selections, and increase or decrease the number of copies.

< 18 >

Trimming button

:

Use to crop the photo that is displayed.

< 19 >

Black button

:

Starts black & white copying, or photo scanning.

< 20 >

Color button

:

Starts color copying, photo printing, or scanning.

Top

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments