The camcorder can be powered by a battery pack or be connected to a household power outlet. Charge the battery pack before use.
Attaching and Charging the Battery Pack
- Turn off the camcorder.
- Attach the battery pack to the camcorder.
- Open the LCD panel. - Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks.
- Connect the power cord to the adapter.
- Plug the power cord into a power outlet.
- Open the terminal cover and connect the power adapter to the camcorder's DC IN terminal.
The charge indicator starts flashing. The indicator will stay on when charging is complete.
|

|
Once the battery is fully charged:
- Disconnect the power adapter from the camcorder.
- Unplug the power cord from the power outlet and the adapter.
To remove the battery pack:
Hold the <BATT.> button pressed down to release it, and pull out the battery from the ridge on its bottom part.
Charging, Recording and Playback Times with the BP-208 Battery Pack
The charging time of the BP-208 battery pack is 160 min.
The following recording and playback times are approximate and vary according to the charging, recording or playback conditions.
--
|
Max. Recording Time
|
Typical Recording Time*
|
Viewfinder
|
85 min.
|
45 min.
|
LCD
|
Normal
|
80 min.
|
45 min.
|
Bright
|
75 min.
|
40 min.
|
*Approximate times for recording with repeated operations such as start/stop, zooming, power on/off.