Setting the date and time - Sure Shot 115u II

Article ID: ART154379 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Setting the date and time - Sure Shot 115u II


Setting the Date and Time

When you replace the battery or travel to a different time zone, us the following procedure to set or adjust the date and the time settings.

1. Select the DATE Mode

2. Press the button for more that 2 seconds for the date/time set mode
3. Press the button to select the setting position (numbers blinking)
  • Setting position cycles through in the order year - month - day - hour - minute -(:)
4. Press the button to set the number
5. Repeat steps 3 and 4 above to set all digits of the date and time
  • pressing the button while ":" is blinking resets the seconds (:) setting to zero
6. Finish setting the date and time
  • Press the button to complete the date and time settings
  • Press the MODE button and the power switches off

Each time the button is pressed, the number increases by one. If kept pressed, the number increases continuously



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments