Copying onto Transparencies

Article ID: ART154413 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Copying onto Transparencies


Copying onto Various Types of Copy Stock

Place the original on the platen glass with the center of it aligned with the "arrow" mark.

  1. Raise the paper output guide as shown below.

  2. Adjust the slide guides for the width of the transparency.

  3. Insert a transparency into the single-sheet bypass.

    • If the paper output guide is not in the raised position, the transparencies become curled after copying.
    • Remove each transparency from the copy tray as it is output.

  4. When finished copying transparencies, lower the paper output guide to its original position.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments