Recording movies to a VCR - Elura 40MC and Elura 50
Article ID: ART154488 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Recording movies to a VCR - Elura 40MC and Elura 50

Solution

Recording to a VCR or Digital Video Device - Elura 40MC and Elura 50

You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality.

Also see: Connecting the devices

Recording

  1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
    - If you are connecting via AV terminal, check the setting

  2. Connected device: Load a blank cassette and set the device to record pause mode.

  3. Locate the scene you wish to copy and pause playback shortly before the scene.

  4. Play back the tape.

  5. Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete.

  6. Stop playback.
  • When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original.
  • When connecting a digital video device:
    - If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again.
    - Proper operation cannot be guaranteed for all digital video devices equipped with a DV terminal. If operation does not work, use the S-Video or AV terminal.
  • We recommend powering the camcorder from a household power source.

Connecting the devices

Connecting to a VCR:

  1. Turn off all devices before starting the connections.

  2. Connect the STV-250N Stereo Video Cable to the camcorder' s AV terminal and the audio/video terminals on the VCR.
    - Connect the white plug to the white audio terminal L (left), the red plug to the red audio terminal R (right) and the yellow plug to the yellow video terminal VIDEO.



  3. Set the input selector to LINE.

SIMS Doc Id

0