Charging the battery pack for a ZR80, ZR85, and ZR90 camcorder
Article ID: ART154739 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Charging the battery pack for a ZR80, ZR85, and ZR90 camcorder

Solution

Charging the Battery Pack

  1. Connect the power cord to the adapter.
  2. Plug the power cord into a power outlet.




  3. Connect the power adapter to the camcorder's DC IN terminal.
    - The CHARGE indicator starts flashing. It glows steadily when charging is complete.
  4. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the adapter.
  5. Remove the battery pack after use.
    - Press the BATT. RELEASE button to remove the battery.

Charging, Recording and Playback Times

Below times are approximate and vary according to the charging, recording or playback conditions.

Battery Pack

BP-508
(Supplied)

BP-512/
BP-511
(Optional)

BP-514
(Optional)

BP-522
(Optional)

BP-535
(Optional)

Charging Time

110 min..

120 min..

150 min.

210 min

310 min.

Max. Recording Time Viewfinder

125 min.

225 min.

260 min.

455 min.

730 min.

LCD

85 min.

155 min.

180 min.

320 min.

520 min.

Typical Recording
Time*
Viewfinder

65 min..

125 min..

145 min.

255 min.

405 min.

LCD

45 min.

85 min.

100 min.

175 min.

280 min.

Playback Time

90 min.

170 min.

195 min.

345 min.

550 min.


* Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter.
  • Charge the battery pack in temperatures between 41 ?F and 104 ?F (5 ?C and 40 ?C).
  • A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging.
  • We recommend that you prepare battery packs 2 to 3 times longer than you think you might need.
  • To conserve battery power, turn off the camcorder instead of leaving it in record pause mode.
  • Turn off the camcorder before connecting or disconnecting the power adapter.
  • If the adapter is used close to a TV, it may cause picture interference. Move the adapter away from the TV or the antenna cable.
  • Do not connect any products that are not expressly recommended to the camcorder's DC IN terminal or to the power adapter.
  • You may hear some noise from the power adapter during use. This is not a malfunction.
  • Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.
  • When the power adapter or battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and charging stops.
  • The CHARGE indicator informs you about the charge status.
    0-50%: Flashes once every second
    More than 50%: Flashes twice every second
    100%: Glows steadily


SIMS Doc Id

0