Transferring video recordings to a computer ZR80
Article ID: ART154756 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Transferring video recordings to a computer ZR80

Solution

Transferring Video Recordings to and from a Computer ZR80

You can transfer recordings to and from a computer equipped with a IEEE1394 (DV) terminal or IEEE1394 capture board. Optional software is required for transferring recordings from the tape to a computer. Refer to the instruction manual of the software.

  • Operation may not work correctly depending on the software and the specifications/settings of your computer.
  • If the computer freezes while you have connected the camcorder, disconnect and reconnect the DV cable. If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them.
  • Make sure that camcorder and computer are not connected with a USB cable before connecting the camcorder to the computer using the DV cable. Otherwise, the computer may not operate properly.
  • We recommend powering the camcorder from a household power source while it is connected to the computer.
  • Refer also to the instruction manual of the computer.

SIMS Doc Id

0