1) Open the back cover and load the film - push the back cover release lever down
2) Position the film correctly between the film guides
3) Pull the film out to the film leader position indicator.
Make sure that there is no slack in the film when you pull it out.
If the edge of the film leader goes beyond the film leader position 4 indicator, rewind some of the film back into the cartridge.
4) Close the back cover.
The film automatically winds on to the first frame and "1" appears on the frame counter.
If the frame counter shows a blinking "0". the film did not load correctly. Load the film again.
ISO 400 DX-coded film is recommended. The film speed is set to ISO 25 when non-DX film is loaded. If the film does not have a DX-code, insert it into the film compartment, close the back cover and press the shutter button once or twice.
