Charging the XL/GL/XH series camcorders battery pack

Article ID: ART154804 | Date published: 06/09/2015 | Date last updated: 08/17/2015


Charging the XL/GL/XH series camcorders battery pack


Charging the Battery Pack

Disconnect the DC coupler from the power adapter before charging. Remove the terminal cover of the battery pack.

  1. Connect the power cord to the adapter.

  2. Plug the power cord into a power outlet.

  3. Attach the battery pack to the adapter.
    - Press lightly and slide it in the direction of the arrow until it clicks.
    - The CHARGE indicator starts flashing. It glows steadily when charging is complete.

  4. When charging is complete, remove the battery pack from the adapter.

  5. Unplug the power cord from the power outlet and disconnect it from the adapter.

The CHARGE indicator informs you about the charge status.

0-50% charged Flashes once every second
50%-75% Flashes twice every second
More than 75%: Flashes 3 times every second
100% Glows steadily

When the power adapter or battery pack is defective, the CHARGE indicator turns off, and charging stops.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments