Ask a Question

Setting up slide shows on the camera using ZoomBrowser EX 5.x

Article ID: ART154830 | Date published: 06/09/2015 | Date last updated: 08/17/2015
 

Description

Setting up slide shows on the camera using ZoomBrowser EX 5.x

Solution

Setting up slide shows on the camera using ZoomBrowser EX 5.x

You can edit a camera slide show from the computer (if your camera supports the slide show function).

  1. Connect the camera to start Canon Camera Window.



  2. Click the [Set to Camera] tab in the Camera Control Window, then click [Set Slide Show/ DPOF]..



    REFERENCE: When the Main Window is open, you can open the Camera Control Window by clicking [Acquire & Camera Settings], followed by [Set to Camera].

  3. Click the [Slide Show] radio button at the top left of the next window and select the number (1-3) of the slide show you wish to edit.



  4. Drag an image from the list on the left and drop it into the area on the right to line up the images to be used in the slide show.



  5. When you are done arranging the slide sequence, click [Save to Camera].
    -     This saves the slide show and completes the setup.

REFERENCE:
  • If you want to change the sequence of some images, just drag them to the right place in the area on the right.
  • If you want to remove an image from the slide show, select the image. On the [Edit] menu, click [Clear].

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments