Adjusting the playback volume Optura 600

When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.

Also see: Adjusting the Headphones Volume

Adjusting the Speaker Volume

Set the camcorder to PLAY(VCR) / or PLAY(VCR) / mode. Turn the SET dial up to increase the volume, and down to lower the volume. A volume bar appears for 2 seconds. You can turn off the volume completely by turning the SET dial down until "OFF " appears. Turn the SET dial up to increase the volume again.

The speaker does not sound when headphones are connected to the camcorder.

You can also use headphones to check the sound while recording. Use the <MENU> button to adjust the volume

Adjusting the Headphones Volume

1. Press the <MENU> button to open the menu, select [AUDIO SETUP], and press the SET dial.
   
   
2. Select [PHONES VOL.] and press the SET dial.
   
   
3. Turn the SET dial up to increase the volume and down to lower the volume.
   
   
4. Press the <MENU> button to exit the menu