Install the print head properly iP6600D / iP6700D

Article ID: ART155143 | Date published: 06/09/2015 | Date last updated: 08/17/2015


If an ink tank is not seated properly, colors in the print out may be missing or distorted.


Installing the Print Head

1. Raise the print head lock lever.

2. Pull out the print head from its package, then remove the orange protective cap from it.

Note: Do not touch the print head nozzles <1> , electrical contacts <2>, or ink supply ports <3>.
Doing so may cause printing problems.

3. Place the print head in the holder and lower the print head lock lever carefully until you hear a click.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments