Install the printer driver.
STEP 3
Check the device name on the LCD.
See Setting up the Printer
STEP 4
Register the printer as a Bluetooth device.
When using Windows XP :
Authenticate the printer through a Bluetooth device in the control panel on Windows XP.
See Registering the Printer
When using a Toshiba Windows XP computer:
Authenticate the printer using Bluetooth Settings*.
* When the computer which builds in a Bluetooth module manufactured by Toshiba Corp., or the program attached to the Bluetooth adapter of the option manufactured by Toshiba is used, the computer can register a printer easily.
Bluetooth Settings can be started by clicking Start and selecting All Programs, TOSHIBA, Bluetooth, and Bluetooth Settings.
For details on Bluetooth Settings, refer to your computer's operation manual.
The operations may vary depending on your operating program. In this case, refer to your computer's operation manual.
Top of Page
Setting up the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the printer in preparation for Bluetooth printing.
The LCD screens in this section refer to the iP6600D equipped with graphic LCD.
1. Ensure that the printer is turned on, and attach the Bluetooth unit.
Note: When the Bluetooth unit is properly attached to the printer, the POWER lamp flashes two times.
2. Display the Bluetooth settings screen on the LCD
For instructions on displaying the Bluetooth settings click iP6210D / iP6310D or iP6220D / iP6600D
3. Select Device name using the cursor buttons.
The Device name screen appears.
Note: If the Bluetooth settings screen does not appear on the LCD, the Bluetooth unit may not be attached correctly. Attach the Bluetooth unit correctly. If the Bluetooth settings screen still does not appear, the Bluetooth unit may be faulty. In this case, service is required
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account.
4. Check the device name.
The device name is necessary to register the printer as a Bluetooth device. Be sure to note the device name.
Note: If multiple printer units with the same model name are connected to the system, assigning a different device name to each printer is recommended for easy identification of the printer you will use.
After checking the device name, press the <OK> button on the printer.
After checking the Bluetooth settings, register the printer on your computer.
See Registering the Printer
Top of Page
Registering the Printer
Register the printer as a Bluetooth device on Windows XP.
Note: Before registering the printer, enable the Bluetooth function in your computer. For more information, refer to your computer's operation manual. The following procedure is described assuming that the security enhancement feature of Windows XP SP2 has been installed in your computer. To see the version of Windows XP, click 'Start', right click on 'My Computer' and select 'Properties'. Then, it can be confirmed on the System Properties dialog displayed.
1. Click 'Start' and then click 'Control Panel', 'Printers and Other Hardware', and 'Bluetooth Devices'.
2. Click 'Add' in the Devices tab.
The Add Bluetooth Device Wizard will start.
3. Ensure that the printer is turned on, check the 'My device is set up and ready to be found' check box and then click 'Next'.
4. Select the device name of the printer and click 'Next'.
Select the same device name as that checked under Setting up the Printer
5. Click 'Don't use a passkey' and then 'Next'.
Note: If you set a passkey in the printer, select 'Use the passkey found in the documentation' and enter passkey then click 'Next'.
6. Click 'Finish'.
7 Check that the device name selected at step 4 is registered, and click 'OK'.
Now, the settings for printing via Bluetooth communication are ready.
Top of Page
Attaching the Bluetooth unit (BU-20)
To enable printing with Bluetooth communication, you have to attach the Bluetooth unit (BU-20) to the printer.
Refer to the following procedures to attach the Bluetooth unit to the printer.
1. Turn on the printer.
2. Insert the Bluetooth unit into the direct print port.*
*iP6600D shown below. Direct print port is in same location on other models.
Note: When the Bluetooth unit is attached to the printer properly, the Power lamp will flash twice.
Top of Page
1. Press the Menu button.
2. Use the 
buttons to select Maintenance/settings and then press the <OK> button.
3. Use the buttons to select Device settings and then press the <OK> button.
4. Use the 
buttons to select Bluetooth settings and then press the <OK> button. The Bluetooth settings screen is displayed.
1. Use the buttons to select the setting item you want to change.
2. Use the buttons to set the items you want to set and then press the <OK> button.
1. Press the <Configuration> button repeatedly to select 'BLUETOOTH SET' and then press the <OK> button.
1. Use the buttons to select the setting item you want to change and then press the <OK> button.
